Wireless Flash Trigger 2.4 GHz with Transmitter and Receiver for Canon, Nikon, Panasonic, Olympus, Fuji, Pentax, Sony

Wireless Flash Trigger 2.4 GHz with Transmitter and Receiver for Canon, Nikon, Panasonic, Olympus, Fuji, Pentax, Samsung,Sony(Except Sony Flashes)

Wireless Flash Trigger 2.4 GHz with Transmitter and Receiver for Canon, Nikon, Panasonic, Olympus, Fuji, Pentax, Sony

1.Press the Channel Adjustment Buttons (left or right) on the transmitter or receiver to set the channel . 2.Channel Numbers 1-8 will illuminate on the transmitter or receiver to indicate which channel the device is set to . 3.FT-8 Transmitters will only trigger receivers set to the same channel. This flash transmitter and receiver sets is controlled via a radio command, completely separating the flash from the camera. Working distance up to 656ft. The transmitter can 90° rotating, which can make the transmitter adjust to the angle you need, it can be adjusted between the horizontal or vertical camera's hot shoe. Universal hot shose, compatible with Canon, Nikon, Olympus, Panasonic, Pentax, Fuji, Samsung,Sony(Except Sony Flashes) . Connecting sync cable 1.turn off the flash/strobe and the FT-8 receiver. 2.Connect a cable to the receiver's 3.5mm Sync Port. 3.Connect the opposite end of the cable to a flash or studio strobe(a 6.3mm adapter is included for studio strodes with larger ports). 4.Set the flash/strobe to Manual mode. Connecting Receiver hot shoe 1.Turn off the flash and the FT-8 receiver. 2.Slide the flash into the receiver's hot shoe mount . 3.Lock the flash with the flash's locking mechanism. 4.Turn on the flash and the FT-8 receiver. 5.Set the flash to Manual mode. It can have multiple recievers connected to one trigger. Aodelan transmitter can trigger two receivers simultaneously, and up to 8 separate channels. Eight channels can be triggered at the same time with the “ALL” setting. The 2.4 GHz frequency provides reduced radio interference and an extended range without the need for line-of-sight alignment as the radio waves will pass through some walls, windows, and floors. Since 2007 Our team was founded in 2007,approx 150 staffs in total,has the area of approx 4000 square meters.We focus on research,quality and provide customer the best service. We have 10 years experience for camera accessories,our main product flash trigger,wireless remote shutter control and release cable ,battery pack.Provide OEM and ODM,our product hot sell all over the world,we focus on research,quality and provide customer the best service. Wireless Shutter Release Camera Remote Control for Sony Wireless Camera Remote Shutter Release for Canon,Replace Canon BR-E1 Camera Remote Wireless Shutter Release for Nikon,Replace Nikon ML-L7 Lanc Camcorder Zoom Controller with 2.5mm Jack Cable for Sony NX5C, 190P, 150P, 198P, VX2000E/Canon XL1S XL2 XHA1 XM1 XM2 /Panasonic DVC33 DVC63 Camcorders Camera Remote Control Shooting Grip and Tripod Camcorder Remote Control Zoom Controller

Key Features

• ✅ 8 Channels,you can control specific unit or serveal flash units at the same time.Receiver units have a maxium range of 200m, max sync speed of 1/250s.8 different channels let you trigger only chosen specific receivers, or an "all channels" button will trigger all receivers simultaneously.The rotating Transmitter can be used upright or in the low-profile down position.
• ✅ 2.4 GHz frequency provides reduced radio interference and an extended range without the need for line-of-sight alignment as the radio waves will pass through some walls, windows, and floors.
• ✅ Compatible with Canon SpeedLite: 600EXII-RT, 600EX, 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;Nikon SpeedLight SB-900,SB-910,SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24. Olympus FL-50R, FL36R; Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
• ✅ AODELAN FT-8 Transmitter work with all cameras with stand hot shoe mount and cameras with 3.5mm port.It also features a ¼" tripod thread for connecting your flash to a light stand or any device with a ¼" mounting screw.An included 3.5 to 3.5mm sync cable connects the trigger to a studio flash. A 3.5mm to PC plug adapter is also included for flashes with a 1/4" mono plug socket.
• ✅ Parcel includes: Transmitter x 1, Receiver x 1, 3.5 to 3.5mm sync cable x 1, 3.5mm to PC plug cable x 1, 1/4" mono plug socket x 1, Lanyards x2, Carrying pouch x 1

✅ Product Dimensions: 5.91 x 5.12 x 2.36 inches

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.