OCEANLOVE 360 17/16/15/14/13/12,All for MagSafe Wall Mount Magnetic Phone Holder, Self-Adhesive, Rotatable, Waterproof

OCEANLOVE for MagSafe Wall Mount Magnetic Phone Holder, Self-Adhesive, 360 Rotatable, Waterproof, Compatible with iPhone 17/16/15/14/13/12,All Phones, Shower Mirror Car Glass Bathroom Kitchen (White)

OCEANLOVE 360 17/16/15/14/13/12,All for MagSafe Wall Mount Magnetic Phone Holder, Self-Adhesive, Rotatable, Waterproof

The holder is adhered to the wall using strong oversized stickers, securely mounting it without the need for drilling or damaging the walls.For iPhone 16 15 14 13 12 pro max mini phones and magsafe cases ,This Magnetic for magsafe phone holder can hold them directly,another phone or case need to stick the metal ring on the back of them. * The holder DOES NOT have CHARGING function. *The magnetic suction head should not cover anything else to avoid increasing the distance and weakening the magnetic force. The magnetic suction head for magsafe head compatible with other car air vent holder with the clip with diameter 0.67inch 17mm joint ball. It very important to confirm that the fitting area is suitable for adhesive bonding. Tip : Usually case will significantly weakened magnetic force, resulting in weak magnetic attraction of the phone.In this case, it is necessary to remove the phone case or use a phone case for MAGSAFE. ***Temperature Requirements for Pasting: This sticker can work in the temperature range of 41 to 122 However, while pasting it, the recommended temperature is 68 ,the minimum should not be lower than 50.Otherwise, due to the low temperature, it will lose its adhesiveness,pasting cannot be done at this time.

Brand: OCEANLOVE

oceanlove, phone, mirror car, phone holder, 360 rotatable, wall, waterproof compatible, magnetic, 360, wall mount, bathroom, all phones Cell Phones & Accessories Accessories Mounts Shower & Wall Mounts

Key Features

• ✓ [Flexible & Durable Oversized Transparent Stickers No Nails Needed] This sturdy base uses large transparent self-Adhesive stickers for installation, so you don't need nails. The flexible material lets you easily squeeze out air bubbles during application for a stronger hold. Meanwhile, the transparency not only looks sleek but also lets you visually confirm proper adhesion. Compared to Other Mounts: Suction cups may slowly leak air without you knowing and suddenly detach. Opaque adhesive pads hide the weakening grip until they randomly pop off.
• ✓ [Powerful attachment of the phone by the strong N52 magnets(Not for charging)]For iPhone17 16 15 14 13 12 pro max mini phones and for Magsafe case, This Magnetic for magsafe phone holder stand can securely hold them(without phone case) directly, another phone or case need to stick the metal ring(This item includes 2 free metal ring)on the back of them. Easily placed and taken out with one hand, Easily adjust the phone vertically or horizontally for viewing.Tip: The holder DOES NOT have CHARGING function.
• ✓ [Waterproof, Rustproof, and OilproofWidely used] Once securely stuck, this holder withstands brief exposure to moderate temperature water splashes and is safe for greasy kitchen environments.It is widely used on a variety of smooth and hard surfaces like tile, glass, wood, board, slab,laminates, mirror, vinyl siding, stainless steel, metal, etc. at bathroom, kitchen, shower, office, bedroom,etc.Of course, you can also treat it as a wall heavy-duty hook.(Tip:Please do not use it on painted wall, wallpaper, poor wall and other rough or uneven surfaces,Otherwise it can not bear the weight and will damage the wall.)
• ✓ [Diameter 0.67inch (17mmJoint Ball]The magnetic suction head is connected to the base through a joint ball,so the phone can rotate in all directions until the edge of the phone touches the wall.The joint ball of the mount has a diameter of 0.67 inch (17 mm) and is compatible with many others various clip for car phone holders(no included in this item) that their the joint ball is same diameter .
• ✓ ***[Temperature Requirements for Pasting]This sticker can work in the temperature range of 41 to 122 However, while pasting it, the recommended temperature is 68 ,the minimum should not be lower than 50.Otherwise, due to the low temperature, it will lose its adhesiveness,pasting cannot be done at this time
• ✓ .[Eassy to Use and Remove]Just clean and dry the wall,tear off the film on the back of sticker,place it on the wall and press the adhesion base fully and firmly, and then waited 12 hours before using it. To remove it,if it's pasted on the wall for a long time and not easy to peal off. We suggest you to blow hot air with hair drier to dissolve the glue, then it would be tore off easily and no trace.(TIP:Sticker may not be able to be stick again if they are already firmly attached.The sticker with the joint ball can be purchased in another listing.)
• ✓ ***[Temperature Requirements for Pasting]This sticker can work in the temperature range of 41 to 122 However, while pasting it, the recommended temperature is 68 ,the minimum should not be lower than 50.Otherwise, due to the low temperature, it will lose its adhesiveness,pasting cannot be done at this time.Its adhesiveness will only be restored when the temperature rises.

Product Details

• ✓ Model Number: MH-236
• ✓ Color: White

Shipping & Guarantees

• ✓ FREE standard shipping within the United States (3-6 business days)
• ✓ 100% money-back guarantee for lost or damaged items
• ✓ Secure checkout with encrypted payment processing
• ✓ Shipping via UPS, FedEx, and USPS
• ✓ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✓ 30-day hassle-free returns
• ✓ Items must be unused and in original packaging
• ✓ Full refund if item is not delivered
• ✓ Guaranteed delivery within 6-7 business days

Payment Methods

✓ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✓ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.