Johncase New OEM 7MP Front Facing Camera Module with Proximity Sensor, Microphone Flex Cable Replacement for iPhone 7

Johncase New OEM 7MP Front Facing Camera Module w/Proximity Sensor + Microphone Flex Cable Replacement Part Compatible for iPhone 7 (All Carriers)

Johncase New OEM 7MP Front Facing Camera Module with Proximity Sensor, Microphone Flex Cable Replacement for iPhone 7

Ten years of good faith old shop About us Visit the Store Visit the Store Visit the Store Johncase Store at your service With the Johncase charging port Replacement Kit, you will be able to fix your phone charging port immediately! CAUTION: Before removing your phone, discharge the battery below 25%! A charged lithium-ion battery can catch fire or explode if accidentally punctured. BEFORE YOU START: Please create a backup of your phone. INSTALLATION AND DISASSEMBLY INSTRUCTIONS: Power off your phone. Remove the two Pentalobe screws, located at the bottom of the phone. Use a Heat Gun or Hair Dryer, to apply mild heat to the lower edge of the phone about 1 minute 1.Install the suction cup in the lower left corner of the display assembly. 2.Pull up on the suction cup with firm to create a slight gap between the front panel and rear case. 3.Insert the crowbar into the gap and twist the spudger to widen the gap. 4.Slide the spudger up the side of the phone to separate the adhesive and free the clips. Open the display. because the display assembly is still connected to the case on the left side of the phone, then don't open the display further than 90º, The Cable will break if stretched too far. Remove Phillips screws securing from battery connector bracket and Removed. Use the tip of the spudger to disconnect the battery connector from the logic board 1.Disconnect the front camera flex cable. 2.Disconnect the digitizer flex cable. 3.Disconnect the display cable Remove the phillips screws fixed to the front panel sensor assembly connector from the bracket and remove the bracket 1.Disconnect the front panel sensor assembly connector from the logic board. 2.Remove the display assembly. 1.Remove the three Phillips screws securing the earpiece bracket to the front panel. 2.Remove the earpiece speaker bracket. Lift the front facing camera out of the way to access the earpiece speaker. Remove the following two Phillips screws securing the earpiece speaker to the front panel. Remove the earpiece speaker. Use a spudger to gently pry the ambient light sensor out of its recess on the front panel. 1.Use a spudger to gently pry the ambient light sensor out of its recess on the front panel. 2.Use the pick to lift the front camera cable up off of the two plastic posts on the front panel and separate it from the last of the adhesive. Remove the front camera and sensor cable. CONGRATULATIONS! You have now successfully removed the phone charging port! To reinstall the rear camera,plase use the previous steps in this manual and apply them backwards.

Key Features

• ✅ Compatible with:iPhone 7 4.7" A1660(GSM,CDMA), A1778, A1779(ALL CARRIERS)
• ✅ Front Facing Camera Module Proximity Sensor Assembly with Microphone
• ✅ 100% Brand New and original: all of our items have been tested and checked well one by one before shipping,Easy to install
• ✅ Best replacement parts for your choice:when your iPhone 7 front camera/mic/proximity sensor doesn't work or defective
• ✅ We are a professional team which can provide a safety service and long assurance

✅ Product Dimensions: 3.15 x 2.17 x 0.1 inches

✅ Color: iPhone 7

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.