GRAUGEAR M.2 2280 SSD Heatsink, Dual Copper Heat Pipes, 25mm Cooling Fan with PWM Control, Aluminum Plate-Fin Design,

GRAUGEAR M.2 2280 SSD Heatsink, Direct-Touch Heat of Dual Copper Heat Pipes, 25mm Cooling Fan Built-in PWM Control, Aluminum Plate-Fin Design, Thermal Pads incl., 1.34 in Height [G-M2HS03-F]

GRAUGEAR M.2 2280 SSD Heatsink, Dual Copper Heat Pipes, 25mm Cooling Fan with PWM Control, Aluminum Plate-Fin Design,

GRAUGEAR delivers reliable and state-of-the-art products, such as internal and external memory solutions, adapters and accessories. M.2 SSD Clone Docking Station Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Make the world more sustainable by building trust in society through innovation. Building new possibilities by connecting people, technology and ideas, creating a more sustainable world where anyone can advance their dreams. The PS5 SSD can reach temperatures of up to 71 degrees Celsius. Excessively high temperatures may affect the life of the SSD, so it's best to have a heat sink on hand. This is not common with consumer SSDs, but monitoring the temperature of your SSD can help prolong its life. Sony recommends installing a heatsink to the internal PS5 SSD in order to maintain performance. A heatsink works by cooling down the SSD and transferring the heat away from the device. GRAUGEAR has developed a state of the art heatsink using the combination of aluminum and copper metals in order to help dissipate the heat from M.2 NVMe PCIe SSD. The DTH(Direct-Touch Heat) copper pipes are used to absorb the heat from the drive spreading it up to the grooved aluminum surface of the heatsink. With this built-in powerful fan, it can dissipate more heat of the radiator. Efficient Heat Dissipation The G-M2HS03-F with its integrated heat pipe enables reliable cooling and by that especially low temperatures for the M.2 SSD, which allows it to run at full performance for an extended timespan. It fits both single and double sided M.2 2280 modules. Notice: The height is about 1.34 inches(34mm). Please make sure that your PC case have enough space above the M.2 slot and it would not conflict with CPU heatsink or graphic card. Direct-touch base technology provides an optimized transfer of the heat to the pipes. This product was built to perform with two 4mm heat pipes that are arranged to receive the maximum airflow. Pulse width modulation (PWM) allows compatible 4-pin controllers to vary the speed of the fan intelligently. Low-noise operation due to high-quality rifle bearing. In order to accelerate heat transfer by filling the gap between the SSD heat source and the heat sink, the heat energy of the SSD is effectively transferred to the heat sink fins, which also improves the life of the SSD and the product usage efficiency. Plate-fin design of aluminum alloy features an excellent temperature reduction performance. The better heat dissipation of SSD heatsink, the higher endurance of your M.2 SSD drives. Push-pins make installation easy and secure without screws. Available with 3-pin or PWM connectors to meet individual requirements

Key Features

• ✅ ?Copper Heat Pipe?Dual copper heat pipes provides maximum cooling performance by using DTH(Direct-Touch Heat). Its flat machined surface touches the SSD evenly and conducts heat extremely fast
• ✅ ?PWM Cooling Fan?Highly optimised 25 mm fan with PWM support and low-noise adaptor for automatic speed control and ultra-quiet operation, and its maximum fan rate speed is even up to 8500 RPM. With 4-pin connector to motherboard, you can find the best balance between the cooling performance and noise level by setting fan control in Bios
• ✅ ?Aluminum Fins?Plate-fin heat exchanger design ensures the best thermal conducting efficiency and reduces heat from M.2 SSD by up to 60%. Combined with cooling fan and copper heat pipe to achieve better heat dissipation performance
• ✅ ?M.2 2280 SSD?Compatible with both single-sided and double-sided of M.2 2280 NVMe and SATA SSD
• ✅ ?Package Contents?GRAUGEAR M.2 2280 SSD heatsink, thermal pads, screwdriver, screws, warranty card, manual and friendly customer service

✅ Product Dimensions: 3.43 x 1.06 x 1.34 inches; 6.35 ounces

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.