ELPAF38 / V13H134A38 Projector Air Filter for Epson 3020 3010 3020+ 3020E 3010+ 3010E EH-TW5900

ELPAF38 /V13H134A38 Projector Air Filter for Epson 3020 3010 3020+ 3020E 3010+ 3010E EH-TW5900 EH-TW5910 EH-TW6000 EH-TW6100W EH-TW6100

ELPAF38 / V13H134A38 Projector Air Filter for Epson 3020 3010 3020+ 3020E 3010+ 3010E EH-TW5900

Dust is the primary problem of projector maintenance because the projector is usually by a special fan with tens of liters of air flow per minute to its air cooling, high-speed air through the filter may carry micro- PowerLite Home Cinema 3020 3020+ 3020E 3010 3010+ 3010E EH-TW5900 EH-TW5910 EH-TW6000W EH-TW6000 EH-TW6100W EH-TW6100 H421B H421C H421F H422B H450B H501B H501C H501F H502B H503B Also once I put the fresh filter in the cooling fans inside the projector started running a lot quieter which is good. The filter fit, which is what is most important and what I was most worried about. Also once I put the fresh filter in the cooling fans inside the projector started running a lot quieter which is good. It is a direct replacement,Applicable Epson power lamp projector. This is an exact OEM replacement of the original filter. Proper maintenance of your projector is important to get the maximum performance from a projector lamp. With a new projector air filter you can be sure that your projector will supply the best possible cooling to the projector lamp. Common Issues with Epson Products 1. Description: When the projector is working, the Status indicator light flashes blue, while the Temp indicator light stays orange continuously, and then the machine shuts down automatically. 2. Cause: The air filter or exhaust port is blocked or obstructed, affecting heat dissipation. 3. Solution: Exception: If you’re using the projector at 1500m or higher altitude, please turn on the high altitude mode. Press the "Menu" button on the remote control or projector panel to enter the projector's menu, select "Extended Settings" - "Operation" - "High Altitude Mode" - "On". 1. Turn off the projector, disconnect the power, and ensure there are no obstructions within 20cm around the projector. Note: Do not place the projector in the following locations: Areas with poor ventilation or limited space, such as closets or cabinets. On cushions, bedding, blankets, etc. Near high-temperature locations, such as next to central air conditioning vents or other heat dissipation devices. 2. Clean the air filter and exhaust port. 1) Slide the air filter cover latch, then open the lid and remove the air filter. 2) Use a soft-bristled brush (such as a paintbrush) to gently brush off dust from the air filter and exhaust port. Alternatively, turn the air filter over (with the side with the pull ring facing downwards), lightly tap it four or five times to shake off the dust; then flip it over and tap the other side in the same way. Note: Do not soak the air filter in water or use any detergent to clean it. Tapping the air filter too hard may cause deformation or breakage, rendering it unusable. If the dust cannot be removed or the air filter is damaged, please replace the air filter. 3. Reinstall the air filter and close the lid. 4. Reconnect the power and turn on the projector.

Key Features

• ✅ [Dust-Proof ]: The Projector Air Filter is made of mesh material that effectively captures dust, fibers, and other small particles in the air. It can prevent these particles from entering the internal parts of the projector, thereby maintaining a clean internal environment.
• ✅ [Improved Cooling]- Projectors rely on internal fans for cooling. The air filter filters the air entering the projector, preventing dust and debris from blocking the airflow and ensuring proper ventilation, which improves the cooling efficiency of the projector.
• ✅ [Replacement Projector Air Filter for Epson]- EH-TW6500C,EH-TW6550C,EH-TW5810C,EH-TW5900,EH-TW6000,EH-TW6000W,Cinema 3010,Cinema 3010e,EH-TW5800C,EH-TW6510C,EH-TW6515C
• ✅ [Maintenance of Projection Quality]- The accumulation of dust and debris can impact the image quality of the projector. The air filter prevents these particles from settling on the projector lens, thereby ensuring high-quality projected images.
• ✅ [Easy to Install]- Perfectly Matched to the Specified Projector Model. Simply Remove the Air Filter Cover, Remove the Used Filter and Insert the New Filter.

✅ Product Dimensions: 5.17 x 1.75 x 0.56 inches

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.